-
HVAC – Packaged Equipment, Forced Air Handling Equipment and Cooling Towers
-
Natural Gas, Propane Gas, Electric, and Oil Fired Boiler Installation
-
Hydronic Heating and Cooling Systems
-
Radiant Heating and Snow Melt Systems
When a project calls for quality, high-efficiency
light commercial heating and cooling, look to York for innovative,
cost-effective systems.
 Packaged
Heat Pumps
Models
BP 180 - 240 Sunline
Tonnage Capacities
180 MBH (BP180) 240 MBH (BP240)
Efficiency
9.9 EER(BP180) and 10.3 EER (BP240)
Warranty
Compressor - 5 years
Heat Exchanger - 5 years
Other parts - 1 year
BP 180- 240 Sunline
The convertible York Sunline 2000
™ Series single-package heat pump line combines high
efficiency and advanced-economizer controls with unprecedented
installation flexibility and low installation costs. Optional
supplemental electric heaters are offered. Two footprint sizes serve
the 15 and 20 ton heat pump. The 15 ton is in the standard
cabinet whereas the 20 ton is in the new larger "Magnum"
cabinet This unit is designed for commercial applications,
and are easily installed on a roof curb, slab, roof jack, or frame and
these heat pumps also have our Simplicity control board standard
on every unit.
Special Benefits
-
Simplicity Control Board
-
Time-temperature defrost circuit adjusts time
between defrost cycles based on outdoor temperature.
-
Provides optimal comfort control and ensures
reliable operation.
-
All model sizes share a common, compact design
cabinet in a single footprint for on-site flexibility.
-
Installation time and costs are reduced by easy
power and control wiring.
-
All units are factory wired, piped, charged, and
tested prior to shipment.
-
Factory-installed options such as electric
heating elements, supply and return air smoke detectors,
disconnect switch, powered or non-powered GFI convenience outlet,
single enthalpy economizer, power exhaust, high static drive
blower motor, phase monitor, coil guard, dirty filter switch,
hinged filter door, and tooless access panels further reduce
installation costs.
-
BAS factory mounted controls include Novar,
Honeywell, Johnson, and CPC.
-
Electric utility knockouts are provided on unit
side and bottom for easy connections.
-
Convertible airflow design means no panel cutting
is required, and no accessory panel is necessary.
-
Wide range of indoor airflows using 3-speed,
direct-drive, or belt-drive fan motors.
-
Durable finish, made of powder-painted, galvanized
steel to meet 1000-hour salt-spray test demands.
-
Full-perimeter base rails are permanently attached
to provide a solid unit foundation and fork lift access.
-
Compressor is internally protected against high
pressure and temperature.
-
Grooved copper tubes and enhanced aluminum fin
construction improve heat transfer.
-
Permanently lubricated condenser and evaporator
fan motor bearings need no annual maintenance.
-
Complete line of field-installed accessories,
including motorized dampers, supply and return air smoke
detectors, CO2 sensors, single enthalpy economizers, dual
enthalpy sensors, and more.
|
